CV 139 - Revision history

TCSDanM at 20:12, 4 November 2022

2022-11-04T20:12:27Z

← Older revision		Revision as of 20:12, 4 November 2022
Line 5:		Line 5:
	\|cv default=128		\|cv default=128
	}}		}}


	== CV 139 - Brake Button Remapping (Non-Sound) ==		== CV 139 - Brake Button Remapping (Non-Sound) ==

TCSDanM at 20:12, 4 November 2022

2022-11-04T20:12:01Z

← Older revision		Revision as of 20:12, 4 November 2022
Line 1:		Line 1:
			{{Infobox CV
			\|cv name=Brake Button Mapping
			\|cv range=0-255
			\|cv accepted=0-255
			\|cv default=128
			}}


	== CV 139 - Brake Button Remapping (Non-Sound) ==		== CV 139 - Brake Button Remapping (Non-Sound) ==
	CV 139 is used to change which button is used to control the Single-Stage Brake feature in non-sound decoders AND/OR the Brake Lights [[Lighting Effects\|Lighting Effect]].		CV 139 is used to change which button is used to control the Single-Stage Brake feature in non-sound decoders AND/OR the Brake Lights [[Lighting Effects\|Lighting Effect]]. By default, non-sound decoders from TCS have the Brake mapped to button 6. To enable the Single-Stage Brake feature, you must modify [[CV61]] which is not enabled by default. Enabling this feature will allow the button to slow the locomotive at a configurable rate. When the function is On, the brakes will be applied; when the functions is Off, the brakes will be released.

	'''NOTE:''' This CV does NOT affect which button triggers operates the [[Train Brake]] feature or the "Brake Squeal" sound type for WOWSound decoders. If you want to change which button controls the brake application on a WOWSound decoder, you should use [[Audio Assist®]] which uses several different CV's and takes care of all of these individual operations automatically.		'''NOTE:''' This CV does NOT affect which button triggers operates the [[Train Brake]] feature or the "Brake Squeal" sound type for WOWSound decoders. If you want to change which button controls the brake application on a WOWSound decoder, you should use [[Audio Assist®]] which uses several different CV's and takes care of all of these individual operations automatically.

TCSDanM: page creation

2022-11-04T20:08:15Z

page creation

New page

== CV 139 - Brake Button Remapping (Non-Sound) ==
CV 139 is used to change which button is used to control the Single-Stage Brake feature in non-sound decoders AND/OR the Brake Lights [[Lighting Effects|Lighting Effect]].

'''NOTE:''' This CV does NOT affect which button triggers operates the [[Train Brake]] feature or the "Brake Squeal" sound type for WOWSound decoders. If you want to change which button controls the brake application on a WOWSound decoder, you should use [[Audio Assist®]] which uses several different CV's and takes care of all of these individual operations automatically.

Use the table below to remap the Brake Button to a specific button number. A value of 0 removes the brake button mapping, meaning it cannot be used.
{| class="wikitable"
| colspan="10" |Group A (Button 0 through Button 6)
|-
!Button
!X
!0F
!0R
!1
!2
!3
!4
!5
!6
|-
|Value
|0
|1
|2
|4
|8
|16
|32
|64
|128
|}
'''Related:'''

* [[CV 138]]
* [[CV 126|Single-Stage Braking Rate]]
* [[Train Brake]]