TCSDanM at 22:45, 16 July 2021

2021-07-16T22:45:45Z

← Older revision		Revision as of 22:45, 16 July 2021
Line 3:		Line 3:
	\|cv range=0-255		\|cv range=0-255
	\|cv accepted=0-255		\|cv accepted=0-255
	\|cv default=?		\|cv default=0
	}}		}}

TCSDanM: 1 revision imported

2021-07-16T21:47:45Z

1 revision imported

← Older revision	Revision as of 21:47, 16 July 2021
(No difference)

tcs>Dan Mycio at 22:27, 2 April 2021

2021-04-02T22:27:40Z

New page

{{Infobox CV
|cv name=Packet Time-Out Value
|cv range=0-255
|cv accepted=0-255
|cv default=?
}}

==NMRA CV 11 - Packet Time-Out Value==
This CV sets up the maximum time period that the decoder will maintain its speed without receiving a valid DCC packet.

From NMRA Standard [https://www.nmra.org/sites/default/files/s-9.2.4_2012_07.pdf S-9.2.4 Section C]:

''"While in digital operations mode if the packet time-out value is exceeded the Multi Function Digital Decoder will bring to a stop all controlled devices. The purpose of this time-out is to insure that each Multi Function Digital Decoder receives a periodic update from the Digital Command Station and thereby help prevent runaway conditions. The user should be able to define the value for this time-out within these restrictions: ''

A value of 0 disables the time-out (i.e., the user has chosen not to have a time-out). A value range of 1 through TIMEOUT_MAX sets the time-out to the chosen value. The minimum value of TIMEOUT_MAX will be 20 seconds. It may be longer at the manufacturer's discretion."''

[[Category:Standard CV]]''

CV 11 - Revision history

TCSDanM at 22:45, 16 July 2021

TCSDanM: 1 revision imported

tcs>Dan Mycio at 22:27, 2 April 2021