CV 8 Macros

From Train Control Systems Documentation
Jump to navigation Jump to search

CV 8 "Macros"

CV 8 offers multiple "macro" options which allow you to quickly configure certain aspects of the decoder on the fly. Most macros will perform a sequence of operations internally within the decoder, meaning you would not need to perform each of those operations individually, and can instead use one single command. CV 8 can also be used to save and load User Presets, perform a factory reset, and more!

CV 8 Macros may be programmed on the mainline or a programming track; however, it is strongly recommended that you use a dedicated programming track when performing a factory reset so as to avoid any addressing conflicts.

Available Macros

TCS Non-Sound Version 88-91
Value Macro/Operation
2 Factory Reset (Excluding ULST)
3-9 Not Used
10 Configure F1 and F2 Ditch Lights
11 Configure Trolley Preset
12 Configure "Deluxe" Trolley Preset
TCS Non-Sound Version 92
Value Macro/Operation
2 Factory Reset (Excluding ULST)
3-7 Not Used
8 Factory Reset (Excluding ULST)
10 Configure F1 and F2 Ditch Lights
11 Configure Trolley Preset
12 Configure "Deluxe" Trolley Preset
WOWSound Version 4
Value Macro/Operation
2 Factory Reset (Excluding ULST)
3-9 Not Used
10 Configure F1 and F2 Ditch Lights
11 Configure Trolley Preset
12 Configure "Deluxe" Trolley Preset
13 Set Throttle Mode to "Traditional"
14 Set Throttle Mode to "Prototype"